0ur opinion:

:
Angled Puck Transducer lnside Hull Transducers mount to the inside of most fiberglass boat hulls and transmit the sonar signal through the hull. 0n hulls with a deadrise less than 15 degrees, a flat bottom transducer should be used. For angles greater than 15 degrees, an angled transducer is recommended to assure the sonar signal travels downward. Description: Single/Dual Puck Angled Transducer. For Use With: Piranha 1, Piranha 2, Piranha 3, Piranha 4, Piranha 5, Matrix 15, Matrix 17, Matrix 25, Matrix 27, Matrix 55, Matrix 65, Matrix 67, Matrix 97, FF515, FF535, FF565.

:
The Humminbird XAP 9 20 Angled Puck Transducer is designed to mount to the inside of most fiberglass hulls with a deadrise greater than 15 degrees, and transmit the sonar signal downward through the hull itself. Your boat's hull must be of single-layer, fiberglass construction and be free of trapped air or voids in order for a puck transducer to operate correctly, so cored fiberglass, metal and wood will not work. This unit is meant to be glued to your inner hull with a slow-cure epoxy, which is included, and connects to your compatible Humminbird sonar or fish finder system via the included 15-foot cable. The Humminbird XAP 9 20 is a single/dual puck transducer and is designed to be used with Humminbird's; Piranha 1, Piranha 2, Piranha 3, Piranha 4, Piranha 5, PiranhaMax 10, PiranhaMax 15, PiranhaMax 20, Matrix 15, Matrix 17, Matrix 25, Matrix 27, Matrix 55, Matrix 65, Matrix 67, Matrix 97, FF515, FF535, and FF565. This item is backed by Humminbird's one-year limited warranty.








Piece Availability: Usually ships in 24 hours

---

---