0ur opinion:

:
The PixelPak V1 blends protection, style and versatility into this compact case. Created with a rugged mixture of rubber, aluminum and plastic, this cardholder keeps your memory cards safe and organized in a compact area.

---

We found more related products for you:
     click 4 more

We found more related products for you:

• Transcend TS8GSDHC6 8GB SDHC card (SD 2.0 SPD Class 6)
• PixelPak V2 Hard Memory Card Case
• Nikon 7072 Lens Pen Cleaning System
• Nikon ML-L3 Wireless Remote Control for Nikon D40, D40x, D60 & D80 Digital SLR Cameras
• SanDisk 2GB SD Memory Card (SDSDB-2048, Bulk Package)
• click 4 more

---

Buyer's feedback: - * Cards come loose and jostle around inside ...
I would not recommend this case. While it has a hard shell, the disks come loose and jostle around inside. The hard rubber is too hard to hold onto the disks. If they had used soft rubber or even a pill pack type material it would have been better. This is going back to amazon. So what if the cards are protected from external forces if they are subject to internal ones that can be as bad.

---

Buyer's feedback: - A great little case!
I this Lowepro pixel pak v1-alminum wallet to house all of my fragile SD cards. Great tool for protecting my hundreds of dallars worth of info. it also has a rubber insert for a TP Lan PC card that plugs into your laptop. it's a well made wallet, and can take a punch or two. I like this little safe. a good product. TM.Baltimore.

---

Buyer's feedback: - * Most Excellant ...
This is great. It comes ready to hold 8 SD Cards. You can fit 4 on each side of the case. In place of SD Cards you can put picture xD cards (like in the photo), but I don't have any of those. Under each SD card you can fit a miniSD card. I only have 1 microSD to mini adapter, but it fits. I was also able to put 5 microSD cards under a SD card, but there is nothing to hold them from sliding around, but it works and the SD card hold them from falling out. I think six would fit, but I only have 5, that means you could fit like 24 microSD cards under the 4 SD slots, x 2 if you use both sides. My problem is I have 10 SD cards. There also included is another rubber insert. You can pull either of the two SD inserts out and stick this one in. It was meant to hold a PCMCIA size card for a notebook. I don't have one of those, but was able to place either 2 CF cards or 1 CF card and 4 SD cards, or 8 SD cards (double stacked) and my microSD to USB adapter in this space. Again they are loose and can slide around some, but it functions. You just need to be careful when opening using this way so your cards to not fall all on the floor, but this is easy too. One side is black, the bottom, and the top is silver/aluminum. Just place the black side down on desk, then open and the loose cards will not fall out. If you really wanted too you could pull the rubber insert completely out, I was able to fit 6 SD cards flat that way and then stack 'em 3 high so 18 could be fit in the space, I just wanted too see if it could be done, I don;t have that many but I do have enough to have to use the PCMCIA size insert on one side and a 4 SD insert on the other. I do not mind too much, I could leave 2 SD cards behind but its nice to have my whole collection. You can only fit the loose cards on one side, otherwise they would fall out when opening. Now when I travel I can carry all my media cards for my cell phones and my digital camera, plus media adapters in case I need them and they will all be in one place and not easily lost in some pocket somewhere or the bottom of the suitcase. The color is nice, in this case it matches my Centro which is black and silver. It is about the same size, same thickness, a little shorter and a little wider but it looks like it came with the phone.

---

Buyer's feedback: - Cards everywhere...
I have had this case for over a year, and have enough SD cards to fill all 8 slots. It does a good job of protecting the cards once I have closed the case. The problem is that when I open the case, the cards fall out of their spaces. I'm not an overly violent or strong person, and I don't feel that I am being too rough with it. I just have to be very careful when, where and how I open it.

---

Buyer's feedback: - * Love it! ...
I love this memory card holder. Seems to be well made, the inserts hold the cards well. I have never opened it up and had the cards fall out. Clasp holds it closed and does not accidentally open when bumped. Great product. I would recommend this to others.